Supports dial-up, phone call, SMS, TCP, UDP, MQTT, HTTP(S), FTP(S), and so on GNSS positioning: GPS, Beidou, Glonass, Galileo, QZSS, LBS base station USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 4G communication Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP…
LTE Cat-4, 3G, 2G Frequency Bands. LTE Cat-4: Up To 50Mbps (Uplink) / Up To 150Mbps (Downlink). 3G (HSPA+): Up To 5.76Mbps (Uplink) / Up To 42Mbps (Downlink). MP2128DT, MP1482 power chip NAU8810 audio decoder TXS0108EPWR voltage translator Satellite Bands: GPS/Beidou/GLONASS. Supports echo cancellation, noise reduction.
Main Controller? Rp2040 Communication Interface Uart + Gpio Communication Baud Rate 115200bps By Default (Configurable) Power Supply Interface USB Port Or Ph2.0 Connector USB Power Input Voltage 5v
Model: Waveshare HRB8825 Stepper Motor HAT Supports: Raspberry Pi series boards, Jetson Nano Motor controller: HR8825 Motor drive voltage: 8.2V-28V Motor drive current: 2.5A Logic voltage: 3.3V
7inch IPS display with capacitive touch panel, hardware resolution is 1024 x 600 Capacitive touch, supports up to 5-points touch Toughened glass capacitive touch panel, 6H hardness DSI interface, refresh rate up to 60Hz.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards High-quality relays, loads up to 5A 250V AC or 5A 30V DC Photo coupling isolation, prevent interference from high voltage circuit Onboard LEDs for indicating relays status
