Battery voltage monitoring. Built-in FrSky telemetry converter. Modern 32-bit processor (STM32 F103) running at 3.3V/72MHz. Onboard USB for setup and configuration. Modern GUI for all operating systems, Baseflight Configurator.
Material: ABS. Wheelbase: 100mm. Prop Size: 65mm Color: Yellow/Red/White Bare weight: 12 gm The Ultra-Lightweight design. Great for building Micro and Nano FPV racing drone with little cost.
The 800×480 display connects via an adapter board that handles power and signal conversion. Only two connections to the Pi are required; power from the Pi’s GPIO port and a ribbon cable that connects to the DSI port present on all Raspberry Pi’s. Touchscreen drivers with support for 10-finger touch and an on-screen keyboard.
Power Requirements:D.C.+5V ( Maximum 100mA, typical 70mA, 50mV peak to peak maximum ripple) Interface:USB 1.1 Operating Temperature:0 to 50 ℃ Storage Temperature:-40 to 80 ℃ Relative Humidity:95% at 60 ℃ Supports operations systems including Windows 8, Windows 7, Windows 98, 2000, NT4, Me, XP, XP Tablet Edition, CE 2.12, CE 3.0, CE.net, Linux, DOS & iMac
Easy two-piece installation design Hole for mounting the pi inside the case Rubber pad grip at the bottom Precise access to all port and status LEDs with Symbols Raspberry LOGO on Top
Raspberry Pi Camera, supports all revisions of the Pi Using IR-CUT filter, it can eliminate color distortion in the daylight Comes with infrared LED, supports night vision 5-megapixel OV5647 sensor Can Attach IR LEDs if Night Vision mode is required
This simple case provides tough protection for your raspberry pi along with 3.5 inch LCD screen High-Quality acrylic case Click together design, no screws, standoffs, or elastic bands required It is easy to use. You just need to click them together
Input supply voltage: DC 12V-40V The maximum output power: 400W The maximum continuous output current:8A Static Current:0.02 A ( Standby ) PWM frequency: 13kHz Duty Cycle adjustable: 10%-100%
Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz) LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0) Operating Power 5V@3A via USB Type-C port. Keyboard Layout: US Dual-Display Micro HDMI Ports which supports H 265 Decode for 4K Video @60p Built-in Raspberry Pi Official Keyboard
Official case for the Raspberry Pi 3 Model A+ Body Material: ABS All primary ports (including microSD) accessible Removable side plate allows access to those wonderful GPIO pins Snug and secure fit protect your Pi while looking great!
Easy two-piece installation design Hole for mounting the pi inside the case Rubber pad grip at the bottom Precise access to all port and status LEDs with Symbols Raspberry LOGO on Top
AC 100~240v or 12V DC input The cables come with a fitted fuse. Microprocessor controlled Li-ion, LiPo, and LiFe capable Input voltage monitoring. (Protects car batteries at the field) Battery break-in and cycling feature Data storage (Store up to 5 packs in memory) Internal resistance checker to see pack health Delta-peak sensitivity Individual cell balancing
Meet UL, CE requirements, Ultra-thin, ultra-small All voltage input (AC: 100 ~ 240V) Low ripple and low noise Output overload and short circuit protection High efficiency, high power density The product is designed to meet the requirements of the EMC and Safety Test
Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2/BLE Extended 40-pin GPIO header Full-size HDMI Single USB 2.0 ports CSI camera port for connecting a Raspberry Pi Camera Module DSI display port for connecting a Raspberry Pi Touch Display 4-pole stereo output and composite video port
The performance is much higher than LM2577. Non-isolated Boost converter. It has a non-synchronous rectifier. Low ultra wide input voltage 3 v ~ 32 v, the best is 5 ~ 32 v working voltage range; Low ultra wide output voltage 5 v ~ 35 v;
"🎉 Enjoy exclusive discounts! Use coupon codes at checkout & get FREE delivery on eligible orders. Shop now! 🚚✨" Dismiss
