Support High Voltage (HV) Receivers Input voltage: 3.7V-27V Max current: 30A 18AWG silicone cable JST Plug Cable length 20cm Weight: 11g ? With LED indicator lamp
32-bit ARM Cortex M4 MCU @ 80 MHz. Current: 20A/25A Voltage: 7.4~14.8V BLHeli D-short 2-4S BLHeli-S is a firmware is open source program Easy to install with supper small size and light weight
32-bit ARM Cortex M4 MCU @ 80 MHz. Current: 20A/25A Voltage: 7.4~14.8V BLHeli D-short 2-4S BLHeli-S is a firmware is open source program Easy to install with supper small size and light weight
Special for FPV image transmission Provide two version to choose: 5V Suitable for: RC Air Plane Output current: Constant 3A Output voltage: 2-6S( 5V version )
Running current: 20A(Output: ?Continuous 20A, Burst 25A up to 10 Secs) Input Voltage: DC 6-16.8V(2-4S ). BEC: 5V/2A. Dimensions (L x W x H): 25 x 15 x 4mm.
Model: XSD30A Processor:?Silabs EFM8BB21 Battery: 2-5S Lipo Current Rating: 30Amp BEC: No (OPTO) Signal frequency: 20-500Hz Firmware: BLHeli_S (bootloader and firmware) Supports: Dshot600/Dshot300 BLHeli_S does Damped Light only
Designed specifically for multi-rotors Twisted servo cable to reduce interference Fast throttle response Low resistance MOSFETs Small and lightweight Thicker PCB for better heat dissipation
Model: XSD12A?Solder version Processor:?Silabs EFM8BB21 Battery: (2-3S Lipo) Current Rating: 12amp BEC: No (OPTO) Signal frequency: 20-500Hz Firmware: BLHeli_S (bootloader and firmware) Supports: 1-2ms signal, Dshot600/Dshot300 BLHeli_S does Damped Light only
Model: XSD20A?Solder version Processor:?Silabs EFM8BB21 Battery: 12.6-16.8V (3-4S Lipo) Current Rating: 20Amp BEC: No (OPTO) Signal frequency: 20-500Hz Firmware: BLHeli_S (bootloader and firmware) Supports: 1-2ms signal, Dshot600/Dshot300 BLHeli_S does Damped Light only
Run on SimonK firmware, optimized to achieve best flight performance Integrated with four ESCs, yet require only one power supply Space saving design, easy repair, and replacement BEC board, control board, and power board are separated Motor wire sockets are not soldered Built with low-voltage and overheating protections as well as self-check function Throttle range can be set for each…