Laser Output Type: Red Cross-Line?Laser Dimensions: Diameter: 12mm, Lenght: 35mm. Weight: 15 gm. Wavelength: 650nm. Voltage: 3~6V. Output Power: Min 2.5mW, Typical 3.0mW, Max 5.0mW. Working current: Min 10mA, Typical 20mA, Max 25mA. Focus?point Intensity can be adjusted with help of lens ring head.
Operating voltage: 6 to 12V DC Onboard TDA2030A Audio amplifier IC Mono channel 18W Power amplifier circuit design Onboard horn socket 10 k adjustable resistance to adjust the volume of the amplification Onboard power indicator light Chip has lead to the main pin, can directly input the audio signal
Dual-Channel Stereo Output Run-on 10V to 26V power Supply PowerSSO -36 EPU Package Much higher efficiency in terms of cost and performance than competitors? IC?s
25 W + 25 W continuous output power at THD = 10% with VCC= 20 V and RL= 8 Ω Wide-range single-supply operation (8 ?? 26 V) High efficiency (η = 90%) Four selectable, fixed gain settings of nominally 21.6 dB, 27.6 dB, 31.1 dB and 33.6 dB Differential inputs minimize common-mode noise Standby and mute features Short-circuit protection
Directly plug antenna interface. I2C bus communication. Multi-capacitor combined filter. Blue LED power indicator. High sensitivity(low noise RF input amplifier). High power auto gains control AGC circuit.
Timer type: Analog twin timer Power supply voltage: 24 ?? 240 V a.c. 50/60 Hz or 24 ?? 240 V d.c. dual usage Allowable voltage: ?10 % of Power supply voltage Power consumption: Max. 4.1 VA (24 ?? 240 V a.c. 50/60 Hz) ?? Max. 2 W (24 ?? 240 V d.c.) Operating time range: 0.1 sec ~ 60 hour
Wide voltage power supply (6~30V) supports micro USB 5.0V power supply The interface is clear and simple, powerful, easy to understand All set parameters automatically save power.
Onboard TJA1050 CAN controller interface chip Chip commonly used pin has led, convenient connection to use Pin 5 v to the power supply PCB board size: 22 (mm) x11.5 (mm) Fully compatible with the ISO 11898 standard High speed (up to 1 Mbaud)
Main chip: LM393 Working voltage: for DC 5V Single-channel signal output Low-level output signal used for human body touch sensor alarm Adjustable sensitivity Pin Connector to board: 4 Pins
Working mode: Class D Quiescent current: 60mA Work efficiency: 90% Rated output power: 100W + 2 x 50W Frequency response: 20Hz to 20KHz Operating voltage: DC18V to DC24V Maximum output current: 3A
Chip type: TPA3116D2 Chip protection: overvoltage under-voltage superheat DC detection short circuit Supply voltage: DC 12V to 24V Output power: 80W X 2 Power efficiency > 90% Number of channels: double channel output Module Size: 60 x 32 x 14mm
Original TPA3116D2 core technology Easy Plug and Play Operation Dynamic operating Voltage Range: 12 to 24V High fidelity 120W out at both Channel (60W per Channel)
Input Voltage : 2 Volt -5.5 Volts DC. The response time max ~ 60mS in fast mode, ~220mS at low power mode @VDD=3V. Sensitivity can adjust by the capacitance(0~50pF). Stable touching detection of the human body for replacing traditional direct switch key. Provides direct mode toggle mode by pad option(TOG pin). After power-on have about 0.5sec stable-time, during the time…
Onboard TTP224 capacitive touch sensor IC 4 keys 4 board-level status indicator Working voltage: 2.4V-5.5V Advanced Pins breakout, so that the output mode and working mode selectable. Low power selection
