Input voltage: 7 -26V Output voltage: 5V Output current: 3A (Max), the current should be controlled within 1.6A for working long hours Conversion efficiency: 96% (Max) Output ripple: < 30mV
Ultra-thin design & adhesive backing provides easy integration to any project Excellent price-performance ratio Easy communication with any microcontroller 5 pins 2.54mm pitch connector,?4x 4type 16 keys. Sticker can peel off for adhesive mounting. Operating Voltage (V): 5 DC
Stably support SignalTap II embedded logic analyzer function, no mistake while crawling data. Fully support all Altera products such as CPLD: MAX3000, MAX7000, MAX9000 and MAXII. FPGA: Stratix, StratixII, StratxIII, Cyclone, CycloneII, CycloneIII, ACEX1K, APEX20K and FLEX10K etc. Active serial configuration device: EPCS1, EPCS4, EPCS16, EPCS64 etc. Enhanced configuration devices: EPC1, EPC4. Supports 3 download mode: AS, PS and JTAG.
Contact type: NC / COM / NO Input current: ??300mA Input voltage: DC 5V Support Win7, XP 32-bit systems Onboard square USB interface, stable connection. Use imported high-performance USB control chip. Application code: Green indicates that the? relay is closed, the red disconnect Military grade PCB board production.
Logical light indication: a small light indicate CHO electrical level. Input feature: 5PF,100K Ohm. USB power supply; USB logic analyzer for monitoring, analyzing and debugging digital circuits 8-Channels USB logic analyzer with a 24Mhz sampling frequency Can analyze UART, IIC, and SPI, etc automatically Great for MCU, ARM system and FPGA development Voltage: 0-5.5V
One male USB plug Two 3.5mm (3-position) Female Jacks (1 for the mic, 1 for headset) Specifically for mic-capable headphones Convenient tangle-free flat cable design Allows the use of older audio accessories with newer computers Can be used with any device which uses USB portable devices
Data can be saved as TXT or Excel Supports CAN bus detection for status checking Sending/receiving CAN data with time scale, allows sequentially displaying Baud rate of USB virtual COM port is configurable in the range of 9600 ~ 2000000bps (2000000bps by default) Supports setting working parameters by configuration software or serial command, can be saved after power off Adopts…
USB Connector Type: Micro USB Output Voltage 5v and 3.3v?Indicator LEDs?USB?Connector Automatic detection of data transfer speeds up to 1Mbps Data exchange capability with an external interface with UART protocol Supports?Windows 8, Windows 7, ?Windows Vista, Windows XP, Linux,?Mac OS X,?Windows CE 4.2-5.2,?Windows CE 6.0
Driver Chip:?CH340G Supports all basic windows versions. The adapter plate integrated 1000μF solid capacitors to ensure the current supply The power supply will not be a problem to make WIFI module crashes unresponsive. Using 3225 SMD crystal oscillator, improve the stability of serial work, on a beautiful and tall. Working voltage: 4.5V ?? 5.5V (Onboard 3.3v LDO Regulator) Working current:…
SPI interface, the control signal lines are led out A headphone and stereo output Onboard Microphone for recording A line-in input interface Separate 3.5 mm Jack for MIC and Speaker Onboard Power Indicator 3.3V and 2.8V of LDO chip AMS-1117 on board provides up to 800mA current
Using serial Nor flash external expansion memory chip W25Q128. Operating Voltage: 2.7-3.6V Support the SPI interface. Capacity: 128M-bit / 16M-byte Clock Frequency: ?? 104MHz
Support Hardwired TCP/IP Protocols: TCP, UDP, ICMP, IPv4 ARP, IGMP, PPPoE, Ethernet 10BaseT/100BaseTX Ethernet PHY embedded Auto-Negotiation (Full-duplex and half duplex) Support Auto MDI/MDIX Simultaneously Supports to 4 independent sockets 0.18 ?m CMOS technology 3.3V operation with 5V I/O signal tolerance Provide Serial Peripheral Interface (SPI MODE 0, 3) support
80MHz high-speed SPI interface Built-in hardware TCPIP protocol stack Support up to 8 Socket connections Support TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE protocol Support power-down wake up Support high-speed serial peripheral interface (SPI mode 0~3) Internal 32K byte send and receive buffer
