Fixed focus lens on-board Improved resolution -8-Megapixel native resolution sensor-capable of 3280 x 2464 pixel static images Supports 1080p30, 720p60 and 640x480p90 video Size 25mm x 23mm x 9mm Weight just over 3g Connects to the Raspberry Pi board via a short ribbon cable (supplied) Camera v2 is supported in the latest version of Raspbian, Raspberry Pi’s preferred operating system…
All-in-one USB-to-serial debug and UART bridge Both interfaces use a 3-pin debug connector Open-source Raspberry Pi Picoprobe software Three different types of debug cables to cover the vast use cases plug and play debugging of Raspberry Pi Pico and other microcontrollers- and microprocessor-based platforms.
Type: High-performance audio HAT for Raspberry Pi Resolution: 24-bit, up to 192 kHz sample rate Power: Supplied via 40-pin GPIO header (no external power needed) Operating Temperature: 0°C to 50°C Compatibility: Works with any Raspberry Pi with a 40-pin header
RP2040 microcontroller chip designed by Raspberry Pi Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz 264KB of SRAM, and 2MB of onboard Flash memory 26 × multi-function GPIO pins 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Onboard temperature sensor
Supports dial-up, phone call, SMS, TCP, UDP, MQTT, HTTP(S), FTP(S), and so on GNSS positioning: GPS, Beidou, Glonass, Galileo, QZSS, LBS base station USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 4G communication Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP…
LTE Cat-4, 3G, 2G Frequency Bands. LTE Cat-4: Up To 50Mbps (Uplink) / Up To 150Mbps (Downlink). 3G (HSPA+): Up To 5.76Mbps (Uplink) / Up To 42Mbps (Downlink). MP2128DT, MP1482 power chip NAU8810 audio decoder TXS0108EPWR voltage translator Satellite Bands: GPS/Beidou/GLONASS. Supports echo cancellation, noise reduction.
Main Controller? Rp2040 Communication Interface Uart + Gpio Communication Baud Rate 115200bps By Default (Configurable) Power Supply Interface USB Port Or Ph2.0 Connector USB Power Input Voltage 5v
