-
Lidar Sensor (1)
Lidar (light detection and ranging) uses eye-safe laser beams to “see” the world in 3D, providing machines and computers an accurate representation of the surveyed environment. Lidar sensors are a key component in autonomous vehicles, providing a high-resolution 3D view of their surroundings. Lidar enables autonomous vehicles to “see” by generating and measuring millions of data points in real time,… -
Sound Sensor (4)
A sound sensor is defined as a module that detects sound waves through its intensity and converting it to electrical signals. sound sensor consists of an in-built capacitive microphone, peak detector and an amplifier (LM386, LM393, etc.) that's highly sensitive to sound. -
-
Add to cart
- Lidar Sensor, Sensors
VL53L0X TOF Based LIDAR Laser Distance Sensor
- ₹159
- Operating voltage: 2.6V to 5.5V Supply Current: 10mA Communication: I2C protocol 940 nm safe and long-ranging laser VCSEL In-built 2.8V linear voltage regulator
-
-
-
-
-
-
Add to cart
- Sensors
Soil Moisture Meter, Soil Humidity Sensor, Water Sensor, Soil Hygrometer for Ardunio
- ₹71
- Dual output mode, analog output more accurate A fixed bolt hole for easy installation With power indicator (red) and digital switching output indicator (green) Having LM393 comparator chip, stable. Operating Voltage: 3.3V~5V
-
-
-
-
-
-
-
-
Add to cart
- Sensors
MPU-6050 3-Axis Accelerometer and Gyro Sensor
- ₹248
- Chip built-in 16bit AD converter, 16-bit data output Driver Chip: MPU6050 Operating Voltage: 3-5V DC Communication: I2C/IIC Protocol Gyro Range: ± 250, 500, 1000, 2000 °/s Accelerometer Range: ± 2 ± 4 ± 8 ± 16 g
-
-
-
-
-
-
- Out of StockRead more
- Accelerometer, IMU, Magnetometer & Gyroscope, Sensors
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module
- ₹71
- Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V. Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C). Peak current: 1.12mA. Operating Pressure: 300 hPa to 1100 hPa. Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m.
-
-
-
-
-
Add to cart
- Modules, Sensors
M177 NRF24L01 2.4GHz Antenna Wireless Transceiver Module
- ₹107
- Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications. Built-in hardware CRC error detection, Multipoint communication address control. Low-power 1.9 ~ 3.6V, only 1uA on Power down mode Built-in 2.4Ghz antenna Built-in voltage regulator Standard DIP Pitch Interface for embedded applications
-
-
-
-
-
-
-
Add to cart
- Temperature & Humidity Sensor
GY-BME280-5V Temperature and Humidity Sensor
- ₹295
- Based on GY-BME280 chip Operating Voltage: 5V Interface:I2C (up to 3.4MHz) ; SPI (up to 10 MHz) Resolution: Temperature: +-1°C ; Humidity: +-3% ; Pressure: +-1Pa
-
-
-
-
- Out of StockRead more
- Sensors
PCB Mounted Passive Buzzer Module
- ₹58
- Operating Voltage : 1.5 ~ 15V DC Working Current: Less than 25mA Tone Generation Range : 1.5 ~ 2.5kHz Dimensions (LxWxH): 26 x 15 x 11 mm
-
-
-
-
-
-
-
Sale!
Add to cart
- Sensors
HC SR04 Ultrasonic Sensor Range finder
- Original price was: ₹72.₹60Current price is: ₹60.
- Affordable Price Operating Voltage: 5 V Sonar Sensing Range: 2-400 cm Max. Sensing Range: 450 cm Frequency: 40 kHz
-
-
-
-
-
Sale!
-
-
Add to cart
- Sensors
RFID Reader/Writer RC522 SPI S50 with RFID Card and Tag
- ₹156
- 1 x RFID-RC522 Reader/Write Module 1 x Standard blank RFID card 2 x A Straight & right-angle header strip 1 x Special-shaped keychain RFID tag
-
-
-
-
-
-
-
Add to cart
- Load / Pressure / Force / Flex Sensor
4.5inch Flex Sensor
- ₹502
- Item Type: Flex Sensor Model No.: FS-L-095-103-MP Thickness (mm): 1 Length (cm): 12 cm Sensor Length (mm): 95mm Resistance (Ohm): Flate resistance: 10K Ohms Resistance Tolerance ±30% Power Rating: 0.50 Watts continuous. 1 Watt Peak Life Cycle >1 million
-
-
-
-
-
-
-
-
Add to cart
- Biometric/ECG/EMG Sensor
ECG Module AD8232 Heart ECG Monitoring Sensor Module Kit for Arduino
- ₹590
- Designed to extract, amplify, and filter small biopotential signals. Leads-Off Detection. Shutdown Pin. LED Indicator. Analog Output. 3.5 mm Jack for Biomedical Pad Connection.
-
-
-
-
-
-
-
-
Add to cart
- Light/Color Sensor
LM393 Photosensitive Light-Dependent Control Sensor LDR Module
- ₹49
- LDR module 4 PIN Operating voltage 3.3V-5V Signal output indicator light. LDR module 4 PIN Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
-
-
-
-
