-
Lidar Sensor (1)
Lidar (light detection and ranging) uses eye-safe laser beams to “see” the world in 3D, providing machines and computers an accurate representation of the surveyed environment. Lidar sensors are a key component in autonomous vehicles, providing a high-resolution 3D view of their surroundings. Lidar enables autonomous vehicles to “see” by generating and measuring millions of data points in real time,… -
Sound Sensor (4)
A sound sensor is defined as a module that detects sound waves through its intensity and converting it to electrical signals. sound sensor consists of an in-built capacitive microphone, peak detector and an amplifier (LM386, LM393, etc.) that's highly sensitive to sound. -
-
Add to cart
- Lidar Sensor, Sensors
VL53L0X TOF Based LIDAR Laser Distance Sensor
- ₹159
- Operating voltage: 2.6V to 5.5V Supply Current: 10mA Communication: I2C protocol 940 nm safe and long-ranging laser VCSEL In-built 2.8V linear voltage regulator
-
-
-
-
-
-
Add to cart
- Sensors
Soil Moisture Meter, Soil Humidity Sensor, Water Sensor, Soil Hygrometer for Ardunio
- ₹71
- Dual output mode, analog output more accurate A fixed bolt hole for easy installation With power indicator (red) and digital switching output indicator (green) Having LM393 comparator chip, stable. Operating Voltage: 3.3V~5V
-
-
-
-
-
-
-
-
Add to cart
- Sensors
MPU-6050 3-Axis Accelerometer and Gyro Sensor
- ₹248
- Chip built-in 16bit AD converter, 16-bit data output Driver Chip: MPU6050 Operating Voltage: 3-5V DC Communication: I2C/IIC Protocol Gyro Range: ± 250, 500, 1000, 2000 °/s Accelerometer Range: ± 2 ± 4 ± 8 ± 16 g
-
-
-
-
-
-
- Out of StockRead more
- Accelerometer, IMU, Magnetometer & Gyroscope, Sensors
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module
- ₹71
- Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V. Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C). Peak current: 1.12mA. Operating Pressure: 300 hPa to 1100 hPa. Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m.
-
-
-
-
-
Add to cart
- Modules, Sensors
M177 NRF24L01 2.4GHz Antenna Wireless Transceiver Module
- ₹107
- Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications. Built-in hardware CRC error detection, Multipoint communication address control. Low-power 1.9 ~ 3.6V, only 1uA on Power down mode Built-in 2.4Ghz antenna Built-in voltage regulator Standard DIP Pitch Interface for embedded applications
-
-
-
-
-
-
-
Add to cart
- Temperature & Humidity Sensor
GY-BME280-5V Temperature and Humidity Sensor
- ₹295
- Based on GY-BME280 chip Operating Voltage: 5V Interface:I2C (up to 3.4MHz) ; SPI (up to 10 MHz) Resolution: Temperature: +-1°C ; Humidity: +-3% ; Pressure: +-1Pa
-
-
-
-
- Out of StockRead more
- Sensors
PCB Mounted Passive Buzzer Module
- ₹58
- Operating Voltage : 1.5 ~ 15V DC Working Current: Less than 25mA Tone Generation Range : 1.5 ~ 2.5kHz Dimensions (LxWxH): 26 x 15 x 11 mm
-
-
-
-
-
-
-
Sale!
Add to cart
- Sensors
HC SR04 Ultrasonic Sensor Range finder
- Original price was: ₹72.₹60Current price is: ₹60.
- Affordable Price Operating Voltage: 5 V Sonar Sensing Range: 2-400 cm Max. Sensing Range: 450 cm Frequency: 40 kHz
-
-
-
-
-
Sale!
-
-
Add to cart
- Sensors
RFID Reader/Writer RC522 SPI S50 with RFID Card and Tag
- ₹156
- 1 x RFID-RC522 Reader/Write Module 1 x Standard blank RFID card 2 x A Straight & right-angle header strip 1 x Special-shaped keychain RFID tag
-
-
-
-
-
-
-
Add to cart
- Load / Pressure / Force / Flex Sensor
4.5inch Flex Sensor
- ₹502
- Item Type: Flex Sensor Model No.: FS-L-095-103-MP Thickness (mm): 1 Length (cm): 12 cm Sensor Length (mm): 95mm Resistance (Ohm): Flate resistance: 10K Ohms Resistance Tolerance ±30% Power Rating: 0.50 Watts continuous. 1 Watt Peak Life Cycle >1 million
-
-
-
-
-
-
-
-
Add to cart
- Biometric/ECG/EMG Sensor
ECG Module AD8232 Heart ECG Monitoring Sensor Module Kit for Arduino
- ₹590
- Designed to extract, amplify, and filter small biopotential signals. Leads-Off Detection. Shutdown Pin. LED Indicator. Analog Output. 3.5 mm Jack for Biomedical Pad Connection.
-
-
-
-
-
-
-
-
Add to cart
- Light/Color Sensor
LM393 Photosensitive Light-Dependent Control Sensor LDR Module
- ₹49
- LDR module 4 PIN Operating voltage 3.3V-5V Signal output indicator light. LDR module 4 PIN Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment)
-
-
-
-
-
-
Add to cart
- Modules, Sensors
2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
- ₹261
- Voltage: 3-3.6V (recommended 3.3V) V. Maximum output power: +20dBm. Power-down mode current: 4.2uA. Operating Range: 1Km Antenna Gain (peak): 2Dbi. 2MB rate (Open area): 520m. 1MB rate (Open area): 750m. 250Kb rate (Open area): 1100m. It uses 2.4GHz global open ISM band, with license free. SPI interface facilitates the communication with MCU I/O port.
-
-
-
-
-
-
-
-
Add to cart
- Sensors
PCB Mounted Active Buzzer Module
- ₹58
- Operating Voltage : 1.5 ~ 15V DC Working Current: Less than 25mA Tone Generation Range : 1.5 ~ 2.5kHz Dimensions (LxWxH): 26 x 15 x 11 mm
-
-
-
-
-
Add to cart
- Electronic Components, Sensors
TTP223 Capacitive Touch Sensor Module – 2 PCS
- ₹71
- Input Voltage : 2 Volt – 5.5 Volts DC. The response time max ~ 60mS in fast mode, ~220mS at low power mode @VDD=3V. Sensitivity can adjust by the capacitance(0~50pF). Stable touching detection of the human body for replacing traditional direct switch key. Provides direct mode toggle mode by pad option(TOG pin). After power-on have about 0.5sec stable-time, during the…
-
-
-
-
-
-
-
Add to cart
- Sensors
Piezoelectric Sensor/Buzzer/Transducer/Disc 27Mm Piezo – Pack of 3 (Silver)
- ₹93
- Sound pressure level: 85DB 10cm The input voltage: 30vp-p max Operating Temperature: -20~70 Clear sound Ultra-thin and lightweight Low power consumption for voltage type
-
-
-
-
Add to cart
- PIR, IR & Motion Sensors
Flame Sensor infrared Receiver Ignition source detection module HW-491
- ₹59
- Output Channel 1 Operating Voltage (VDC) 3.3 ~ 5 Mounting Hole(mm) 3 Length (mm) 32 Width (mm) 14 Weight (gm) 3
-
-
-
-
-
-
-
-
Add to cart
- Electronic Modules and Displays, Sensors
PS2 Joystick Module Breakout Sensor
- ₹65
- Dimensions: 40 x 27 x 15 (LxWxH) mm. Weight: 10gm (without Hat). 2.54mm pin interface leads. Operating Voltage: 5V. Long service life and stable performance. Standard interface and electronic building blocks. Widely use in Arduino DIY projects.
-
-
-
-
-
-
Add to cart
- Sound Sensor
CJMCU-TRRS 3.5mm Jack AV Stereo Module
- ₹35
- Mini design, portable and easy to use. It is the audio-style connectors that you see on some phones, MP3 players, and development boards. Dimensions: 18 x 12 x 6(L x W x H) mm Weight: 2 gm
-
-
-
-
-
-
-
Add to cart
- Modules, Sensors
3.3V Adapter Board for 24L01 Wireless Module
- ₹38
- Input Voltage: 5V DC. Output Voltage: 1.9~3.6V DC . Output Current: 12 mA Voltage Regulator IC: AMS1117-3.3 Compatible Module: NRF24L01 Wireless Transceiver. Dimensions: 26 x 19 x 12mm. Interface: 8-pin header for NRF24L01 Weight : 5 grams.
-
-
-
-
-
-
Add to cart
- Sound Sensor
INMP441 MEMS High Precision Omnidirectional Microphone Module I2S
- ₹250
- Digital I2S interface with high precision 24-bit data High signal to noise ratio is 61 dBA High sensitivity -26 dBFS Stable frequency response from 60 Hz to 15 kHz Low power consumption: low current consumption 1.4 mA High PSR: -75 dBFS
-
-
-
-
-
-
-
Add to cart
- Load / Pressure / Force / Flex Sensor
2.2inch Flex Sensor
- ₹294
- It is a bend sensor for hang gesture recognition. It is a type of variable resistor. The technology of this item is based on resistive carbon elements. It detects the gesture through variation in resistance value. Its resistance increases when a body of components bends. Its radius is smaller, so it gives a higher resistance value. Operating voltage: 0-5V…
-
-
-
-
-
-
Add to cart
- Sensors, environmental sensor
Water Level Depth Detection Sensor Module
- ₹26
- Operating voltage: DC3-5V Operating current: less than 20mA Sensor Type: Analog Detection Area: 40mmx16mm Operating temperature: 10℃-30℃ Humidity: 10% -90% non-condensing
-
-
-
-
-
-
-
-
Add to cart
- Sensors
MQ 135 Air Quality/Gas Detector Sensor Module For Arduino
- ₹135
- Sensitivity to Ammonia, Sulphide and Benzene steam Sensitive for benzene, alcohol, smoke Fast response and recovery Adjustable sensitivity Signal output indicator Output voltage boosts along with the concentration of the measured gases increases.
-
-
-
-
