Power supply: 3 – 5V Good sensitivity The output format: Digital switching output (0 and 1) The comparator output signal is clean, good waveform, driving ability, more than 15mA. A fixed bolt holes for easy installation. Using a wide voltage LM393 comparator.
₹471Original price was: ₹471.₹294Current price is: ₹294.
EYE BLINK indication by LED Great Quality, Easy to Use Instant output digital signal for directly Connecting to Microcontroller Compact Size, Working Voltage +5V DC, TTL output 5V or 0V On board 3-pin header and Facility to interface microcontroller devices
The diameter of the Electrode Pad: 52 mm Cable Length: 2 feet Weight: 30gm. Improved adjustable gain (more rugged) Onboard port for our new?cables Connects to the board straight out of the box The reduced voltage needed (+-3.5V)
Analog TDS Sensor Water Conductivity Sensor Module Board Kit is an uno and other boards compatible TDS sensor/Meter Kit for measuring TDS value of the water. It can be applied to domestic water, hydroponic and other fields of water quality testing This product supports 3.3 ~ 5.5V wide voltage input, and 0 ~ 2.3V analog voltage output, which makes it…
Plug and Play Device Fully waterproof and Shockproof 1-meter long cable provides ease for connections Universal 5 mm DC Female jack 12 Waterproof LED with 3 colours
Model: YZC-131A Dimensions: 75 x 13 x 13 mm (L x W x H) Range: 5 kg Cable Length: 18 cm Fitting ScrewHole Size:Â M3 Rated output: 1.0 0.1mV / V Nonlinear: 0.05% F.S Hysteresis: 0.0% F.S Repeatability: 0.05% F.S
This straight bar load cell (sometimes called a strain gauge) can translate up to 3 kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar.
Output Sensitivity: 1.0 ± 0.1 mV / V. Two selectable differential input channels. On-chip active low noise PGA with the selectable gain of 32, 64 and 128. On-chip oscillator requiring no external component with optional external crystal. On-chip power-on-reset. Measurement Resolution: 24 bit.
Chip built-in 16-bit data output Operating Voltage: 3-5V DC Communication: I2C/IIC Protocol Accelerometer Range: ± 2 ± 4 ± 8 ± 16 g Magnetic Field Range:± 1.3 to ±8.1 gauss
QMC5883L module (three-axis magnetic field module) Model: GY-273 IC: QMC5883L I2C interface 1-2 degree heading accuracy Integrated 12-bit ADC 160Hz max data rate A range of -8 to +8 Gauss
Voltage: DC 2.4V – 5V Average Current Consumption: < 2mA Output mode: level or UART Detection distance: 2cm – 450cm Working temperature: -20°C to +70°C It features temperature compensation. Provides two output modes level or UART.
Operating Voltage: 3.5V-5V Supply Current: 15mA Optimal Sensing Distance: 3mm Designed with the reflected infrared sensor, indicator light. Built in a potentiometer for sensitivity control. On-board LM393 voltage comparator chip and infrared sensing probe TCRT5000L Signal detection sensitivity can adjust Reserve all the way more circuits (P3 voltage drawn)
Operating voltage: DC 5 V. The analog output voltage, the higher the concentration the higher the voltage. The carbon monoxide detection with better sensitivity. With a long service life and reliable stability. Rapid response and recovery characteristics. Range: 10 to 1000 ppm.
