Operating Voltage: DC 7 V to 30 V Maximum Motor Current: 10 A continuous, 30 A peak Motor Output PWM Frequency: 20 kHz RC Input Voltage (RC1 & RC2): Low Level: 0-0.7 V | High Level: 1.5-15 V Output Maximum Current: 0-500 mA
Operating Voltage: DC 6V to 30V. Inputs compatible with 1.8V, 3.3V, 5V, and 12V logic . PWM frequency up to 20kHz. Compatible with sign-magnitude and locked-antiphase PWM operation.
Onboard 1A (maximum) 5V voltage regulator. Onboard 500mA (maximum) 3.3V voltage regulator. 0-5V digital outputs with 3.3V compatible inputs. 14 Digital I/O Pins (6 PWM outputs).(4 pin used for Motor driver) 6 Analog Inputs (Can be digital I/O too). Maximum current up to 10A continuous and 30A Peak. ISP 6-pin Header. 32k Flash Memory. 16MHz Clock Speed. R3 Shield Compatible.
Provides a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 1602 white character blue backlight LCD. The keypad consists of 6 keys select, up, right, down, left and reset. To save the digital IO pins, the keypad interface only uses one ADC channel. The key value is read out through a…
Battery low voltage indicator. Battery over voltage indicator. Thermal protection. Current limit protection. Bi-directional control for dual brushed DC motor. Support motor voltage from?7V to 35VDC. Dimension: 103 x 97 x 40 (LxWxH) mm.
Bi-directional control for a single brushed DC motor. Support motor from 7V to 25V. Maximum current up to 80A peak (1 second), 40A (5 minutes) or 30A (> 20 minutes) continuously. 16 KHz switching frequency for quiet operation. Reverse polarity protection. LiPo battery low voltage warning. Thermal protection. Current limiting base on temperature.
Single power operation Dual Channels means it can drive two brush motor independently, or mixed. Support Signed magnitude and Locked Anti-phase in PWM mode. Two manual/test buttons for each channel. Two output indicator LEDs for each channel. Power, Error indicator, RUN status (Left and Right) LEDs On board reset button to restart the MCU after changing operation mode. Operating modes:…