Screen Resolution: 240 x 320 Screen size: 2.4 inches Touch screen, with the function of handwriting input Screen colour: 65 k Single 3.3 V power supply ?16-bit parallel data interface.
Ideal for programming and testing. An ideal device for programmers. Suitable for ICs up to 28 pins. Low contact resistance when the IC is in place. Lever action for easy insertion and removal. RoHS free.
Worked with Arduino nano. 3 axis stepper motor driver Compatible with micro-drive laser engraving machine, three-axis CNC engraving machine. 2A can be controlled within the two-phase four-wire stepper motor. Released the digital IO interface, easy to connect to other modules, such as ENDSTOP. Released the I2C interface, you can connect to the LCD I2C or another I2C module. Power DC5V…
Ideal for programming and testing. An ideal device for programmers. Suitable for ICs up to 40 pins. Low contact resistance when the IC is in place. Lever action for easy insertion and removal. RoHS free.
Supports 89 series microcontroller devices in 20 & 40 pin packages Supports various 8 pin serial EEPROM ICs ZIF socket enables easy insertion and removal
Product: A203 Version 2 Carrier Board Brand: Seeed Studio NVIDIA Gigabit Ethernet: RJ45 Gigabit Ethernet Connector (10/100/1000) DC Power: DC Input Power TE Connector Compact size (87mm x 52mm x 26mm) saves precious space Compact & all-in-one design
Intel? Pentium? N4200/ Celeron? N3350/ Atom E3950 ?? Processor SoC Onboard LPDDR4 4GB Memory Onboard eMMC 32GB Storage Gigabit LAN x 1, HDMI x 1, USB 3.2 Gen 1 (Type A) x 3 12V DC-in, 5A 40 pin GPIO x 1 6 pin wafer for Audio x 1
Intel? Pentium? N4200/ Celeron? N3350 Processor SoC Onboard 2GB LPDDR4 Memory Onboard 32GB eMMC Storage Gigabit LAN x 2, USB 2.0 x 2, USB 3.0 (Type A) x 3 5V DC-in, 4-6A 40 pin GPIO x 1 DP/eDP/HDMI x 1 MIPI-CSI (4-Lane & 2-Lane) x 1
Model: Adafruit Assembled Data Logging shield SD card interface: FAT16 or FAT32 Onboard regulator: 3.3 V Real time clock (RTC) keeps the time going even when the Arduino is unplugged
ATmega328p @ 8MHz with 3.3V logic/power 3.3V regulator with 500mA peak current output USB serial converter (CP2104) USB bootloader and serial port debugging Hardware I2C, hardware SPI support
Model: Adafruit Feather 32u4 Bluefruit LE Light as a (large?) feather ?? 5.7 grams ATmega32u4 @ 8MHz with 3.3V logic/power 3.3V regulator with 500mA peak current output
ATSAMD21G18 @ 48MHz with 3.3V logic/power 256KB of FLASH + 32KB of RAM 3.3V regulator with 500mA peak current output USB bootloader and serial port debugging Built-in 100mA lipoly charger with charging status indicator LED
ATSAMD21G18 @ 48MHz with 3.3V logic/power 256KB of FLASH + 32KB of RAM 3.3V regulator with 500mA peak current output USB bootloader and serial port debugging Built-in 100mA lipoly charger with charging status indicator LED
ATSAMD21G18 @ 48MHz with 3.3V logic/power 256KB of FLASH + 32KB of RAM 32.768 KHz crystal for clock generation & RTC 3.3V regulator with 500mA peak current output Comes with a USB bootloader and serial port debugging
ATSAME51 32-bit Cortex M4 core with 120 MH 32-bit, 3.3 V logic and power 512 KB Flash, 192 KB RAM 2 MB SPI FLASH chip 3.3V regulator with 500mA peak current output USB Type-C
ARM Cortex M4F (with HW floating point acceleration) running at 64MHz 1MB flash and 256KB SRAM Native Open Source USB stack??? pre-programmed with UF2 bootloader Bluetooth Low Energy compatible 2.4GHz radio FCC / IC / TELEC certified module
