PCB installed inside of aluminum alloy U disk shell, portable, safe and reliable! Interface definition directly marked on the shell, clear, convenient and practical! 5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V Shell characters using laser engraving, never fade off! Permanent clarity! 500MA internal resettable fuse, complete protection of your expensive computer motherboard!…
Input Voltage:?3.3?V Output Voltage:?5-3.3?V CPU ARCHITECTURE:?RM CORTEX-M0 MICROPROCESSOR MODEL:?STM32F030F4P6 Dimensions: 48 x 30 x 8 (LxWxH) mm. Weight: 7 gm.
100% Brand new and high quality?STM32 Board Model: STM32F103C8T6. Core: ARM 32 Cortex-M3 CPU. Debug mode: SWD. 72MHz work frequency. 64K flash memory, 20K SRAM. 2.0-3.6V power, I/O. Color: Black
Product: STMicroelectronics Daughter Board, BlueNRG-MS Low Energy Bluetooth Smart IC, Bluetooth 4.1 Specification Compliant Maximum transmission power +8 dBm ?Excellent receiver sensitivity (-88 dBm) ?Very low power consumption: 7.3 mA RX and 8.3 mA TX at +0 dBm
Product: STMICROELECTRONICS Daughter Board, SPSGRF-915 SPIRIT1 RF Module, For STM32 Nucleo Boards, 915 MHz ISM band Silicon Manufacturer: ?STMicroelectronics Silicon Core Number: SPSGRF-915 For Use With: ?STM32 Nucleo Development Boards
Model: STM32 Nucleo-64, STM32F030R8T6 MCU Product: STMICROELECTRONICS Development Board, STM32 Three interfaces supported on USB. Virtual Com port, Mass storage and Debug port STM32 comprehensive software HAL library Supported by Integrated Development Environments (IDEs) including IAR, Keil, GCC based IDEs
Model: STM32F091RC MCU Flexible board power supply: USB VBUS or external source (3.3 V, 5 V, 7 ?? 12 V) Supported by wide choice of Integrated Development Environments (IDEs) including IAR , Keil?, GCC-based IDEs On-board ST-LINK/V2-1 debugger/programmer with SWD connector. Low power consumption
Model: STM32F103RBT6 MCU Product: STMICROELECTRONICS Development Board Voltage: 3.3V, 5V, 7-12V STM32 Nucleo-64 board does not require any separate probe as it integrates the ST-LINK debugger/programmer.
Model: STM32F302R8T6 MCU Voltage: 3.3V, 5V, 7-12V Two push buttons for user and reset Three interfaces supported on USB. Virtual Com port, Mass storage and Debug port STM32 comprehensive software HAL library Supported by Integrated Development Environments (IDEs) including IAR, Keil, GCC based IDEs
STM32F334C8T6 ARM Cortex-M4 32bit CPU with FPU(72MHz), single cycle multiplication and HW division Onboard ST-LINK/V2-1 with selection mode switch to use the kit as a standalone STLINK/ V2-1 USB re-enumeration capability with three different interfaces supported on USB Power supply through USB bus or from an external 5V supply voltage Extension header for LQFP48 I/Os for a quick connection to…
USB VBUS or external source (3.3V, 5V, 7 to 12V) and power management access point USB communication (LD1), user LED (LD2), power LED (LD3) Two push buttons ?? USER and RESET USB re-enumeration capability ?? virtual com port, mass storage, debug port Supported by wide choice of IDEs including IAR, Keil, GCC-based IDEs
Model: STMICROELECTRONICS Development Board, STM32F446ZE MCU Voltage: 3.3 V and 7 -12 V USB OTG or full-speed device with Micro-AB connector (depending on STM32 support) Crystal oscillator: 32.768 KHz
