Operating Voltage (logic level): 5V 8 analog inputs ports: A0 ~ A7 Input Port: USB MINI Using Atmel Atmega328P-AU MCU Standard 0.1” spacing DIP (breadboard friendly).
Fully compatible with the PC. Moulded strain relief and PVC over moulding to ensure a lifetime of error-free data transmissions. Aluminum under mould shield helps meet FCC requirements on KMI/RFI interference. Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.
Full-speed USB support using Windows standard drivers Real-time execution Processors run at maximum speeds Built-in over-voltage/short circuit monitor Low voltage to 5V (1.8 to the 5V range) Read/write program and data memory of the microcontroller Program up to 512K byte flash.
2 connections for 5V ?hobby? servos connected to the Arduino?s high-resolution dedicated timer 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution) Up to 2 stepper motors (unipolar or…
32 bit ARM Cortex-M4 72 MHz CPU (M4 = DSP extensions) 256K Flash Memory, 64K RAM, 2K EEPROM 21 High-Resolution Analog Inputs (13 bits usable, 16-bit hardware) 1x 12 bit DAC Analog output 34 Digital I/O Pins (16 shared with analog) 12 PWM outputs 7 Timers for intervals/delays, separate from PWM USB with dedicated DMA memory transfers 3 UARTs (serial…
Description: The Arduino UNO R4 WiFi combines the processing power and exciting new peripherals of the RA4M1 microcontroller from Renesas with the wireless connectivity power of the ESP32-S3 from Espressif. On top of this, the UNO R4 WiFi offers an on-board 12x8 LED matrix, Qwiic connector, HID support, VRTC, and OFF pin, covering all potential needs makers will have for…
32 I/O pin all the leads. Classic ATmega16 minimum system, eliminating the hassle of soldering. Support chips: ATmega16/ATmega32 and chip which pin-compatible. Power supply: power adapter or external expansion pin power supply (not support ISP download interface power supply) DC-005 Power Block (supporting the transposon is 5.5*2.1mm). Reset: Power-on-reset and reset button. Power LED (D1) and the program run indicator…
Great for Starting with Arduino Programming A variety of components are included in this pack to try out different projects. The kit comes with quality components assured by Robu.in. All-in-one kit, a great starter kit for learning to code. Microcontroller ATmega328 (SMD) ? Interface CH340G
Product: A203 Version 2 Carrier Board Brand: Seeed Studio NVIDIA Gigabit Ethernet: RJ45 Gigabit Ethernet Connector (10/100/1000) DC Power: DC Input Power TE Connector Compact size (87mm x 52mm x 26mm) saves precious space Compact & all-in-one design
Microcontroller: AT91SAM3X8E Operating Voltage: 3.3V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-16V Flash Memory: 512 KB all available for the user applications SRAM: 96 KB (two banks: 64KB and 32KB) Clock Speed: 84 MHz
Expand 14 digital IO interface (12 steering gear interface)and power Six analog IO interfaces and power One digital port interface for external power supply terminals Digital port external power supply and on-board electrical automatic switch One external power input terminals and one input needle RS485 interface (D0-RX, D1-TX, D2-EN) IIC/the I2C/TWI interface (A4-SDA, A5-SCL) SD card module interface
The reComputer J3010-Edge AI Device is a high-performance computing device designed for AI and machine learning applications. It features the NVIDIA Jetson Orin Nano 4GB module, which provides excellent processing power for complex computations. The device comes with 4xUSB 3.2 ports, allowing for multiple peripheral connections. WiFi/BT connectivity is built-in, providing easy access to wireless networks and Bluetooth devices. The…
Microcontroller: SAMD21 Cortex-M0+ 32bit low power ARM MCU Board Power Supply (USB/VIN): 5V Supported Battery(*): Li-Po single cell, 3.7V, 700mAh minimum DC Current for 3.3V Pin: 600mA Comes with a micro SD card holder
Microcontroller: ATMEGA4809 Operating Voltage: 5V Input Voltage (recommended): 7-12V Digital I/O Pins: 14 (6 Provide PWM Output) PWM Digital I/O Pins: 6 Analog Input Pins: 6 DC Current per I/O Pin: 20mA DC Current for 3.3V Pin: 50mA Flash Memory: 48KB (ATMEGA4809) SRAM: 6,144KB (ATMEGA4809) EEPROM: 256 Bytes (ATMEGA4809) Clock Speed: 16MHz
