Product: MICROCHIP DM080104 AVR Embedded Daughter Board AND Modules Controlled by the same ATtiny1617 MCU 5×6 Surface diamond pattern with dedicated driven shield LEDs to indicate position and mode MCP23017 LED driver
SAMA5D44 Cortex-A5 Microprocessor 512MBytes DDR2 memory 512MBytes NAND Flash memory 1 EEPROM with a unique MAC address and serial number LCD connectors 10/100 Ethernet MAC with PHY and connector
Model: MICROCHIP Evaluation Kit, ATSAMD10 MCU Free Atmel IDE for development of C/C++ and assembler code for Atmel microcontrollers Programming and debugging the ATSAMD10 Xplained Mini You can programming the ATmega32U4 Using a Bootloader Xplained Pro extension headers can easily be strapped in
Product: MICROCHIP Expansion Board, PROTO1 Xplained Pro, Connects to Expansion Headers on Xplained Pro MCU Board Breadboard compatibility: May have breadboard-compatible headers for connecting wires and components Peripheral interfaces: May include additional interfaces such as UART, I2C, and SPI On-board components: May include LEDs, buttons, and other components for testing and debugging
Product: MICROCHIP Expansion Kit, Xplained Pro, Bosch BNO055 Intelligent 9-Axis Absolute Orientation Sensor Compatible with the Xplained Pro extension headers I2C interface to BNO055 One RGB LED
Product: MICROCHIP XPRO EXTENSION BOARD WITH BLE 3.3V LDO for power regulation SPI flash for storing firmware images (DFU OTA) Switch for BM71 operation mode Switch to turn all LEDs off for current measurement Switch for GPIO control
Product: MICROCHIP? ATTINY817-XPRO? Evaluation Kit, ATtiny817 MCU, Embedded Debugger, Microchip Studio Support Two mechanical user buttons Two QTouch? buttons ?One yellow user LED ?32.768 kHz crystal
Product: MICROCHIP? DM164151? Evaluation Kit, Curiosity Nano, AVR128D MCU, 8-Bit One yellow user LED, one mechanical user switch One 32.768KHz crystal Board identification in Atmel Studio/Microchip MPLAB? X IDE One green power and status LED
Fully Compatible with 10/100/1000Base-T Networks Integrated MAC and 10Base-T PHY Supports One 10Base-T Port with Automatic Polarity Detection and Correction Supports Full and Half-Duplex modes Programmable Automatic Retransmit on Collision Programmable Automatic Rejection of Erroneous Packets SPI Interface with Clock Speeds Up to 20 MHz For Arduino, SPI, AVR, PIC, LPC, STM32.
Family Name: Grove Product Type: Shield Supply Voltage Min: 3.3 V 12-bit ADC converter, compatible with I2C interface I2C bus master controller with UART interface Interfaces GPIO: I?C, UART
Compatible with Arduino NANO All digital and analog pins breakout Compact size; External power supply current support Leads all pins out, convenient for wiring and doing experiments.
