Input Voltage:7.2-8.5 V GPIO pins:40 Interface Connector Type: LPF2 Easy-to-use Python library to control your LEGO Technic devices Onboard Raspberry Pi RP2040 microcontroller manages low-level control of LEGO Technic devices
Type: High-performance audio HAT for Raspberry Pi Resolution: 24-bit, up to 192 kHz sample rate Power: Supplied via 40-pin GPIO header (no external power needed) Operating Temperature: 0°C to 50°C Compatibility: Works with any Raspberry Pi with a 40-pin header
Supports dial-up, phone call, SMS, TCP, UDP, MQTT, HTTP(S), FTP(S), and so on GNSS positioning: GPS, Beidou, Glonass, Galileo, QZSS, LBS base station USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 4G communication Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP…
LTE Cat-4, 3G, 2G Frequency Bands. LTE Cat-4: Up To 50Mbps (Uplink) / Up To 150Mbps (Downlink). 3G (HSPA+): Up To 5.76Mbps (Uplink) / Up To 42Mbps (Downlink). MP2128DT, MP1482 power chip NAU8810 audio decoder TXS0108EPWR voltage translator Satellite Bands: GPS/Beidou/GLONASS. Supports echo cancellation, noise reduction.
Main Controller? Rp2040 Communication Interface Uart + Gpio Communication Baud Rate 115200bps By Default (Configurable) Power Supply Interface USB Port Or Ph2.0 Connector USB Power Input Voltage 5v
Specification Standard: IEEE 802.3at-2009 PoE Input voltage: 37-57 V DC, Class 4 device Output power: 5 V DC/4 A Cooling: 25 mm × 25 mm brushless fan delivering 2.2 CFM for processor cooling Features: fully isolated switched-mode power supply; fan control Operating temperature: 0 °C to +50 °C
HAT compliant accessory; EEPROM, mounting holes Full-HD audio ?? up to 24-bit/192kHz playback Up to 2x35w of crystal clear amplification No soldering required to your Raspberry Pi Sound card ?? access to gpio yes.
